Blackmagic Design ATEM Studio Converter 2

Blackmagic Design ATEM Studio Converter 2

Optical Fiber Connectors

The ATEM Studio Converter 2 uses standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.

Talkback and Tally

The unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or if the area is too loud. When connected to the ATEM Camera Converter, you can talk to your camera operators no matter how far away they are, without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.

Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allows you to control who hears what. The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.

Multiple Units

Each ATEM Studio Converter 2 connects to up to four ATEM Camera Converter units, allowing you to communicate with up to four camera operators at a time. Multiple Studio Converter 2 units can be cascaded together when more than 4 cameras are needed.

Precision Signal Processing

The unit features chips that use 10-bit processing, and are switchable between SD and HD, for a clean signal. The unit features four independent simultaneous SDI to optical and optical to SDI converters. When used in conjunction with the ATEM Camera Converter the unit can also be used as four independent SDI or Fiber to HDMI converters. 

Features

• 4 x Bi-directional Converters in 1 RU Unit
• Optical Fibre Signal Range 45 km/28 miles
• Connects up to 4 ATEM Camera Converters
• 4 x Fibre to SDI 10-bit Converters
• 4 x Switchable SD/HD-SDI Outputs
• Camera Talkback with Select, Vol & Mute
• Connect to ATEM Switchers/Converters
• Supports SDI Switcher Tally Output
• Send PGM Feed to Fibre Connected Cameras