Rycote HC-35 Long Shotgun Microphone (35cm)
The Rycote HC-35 is a hypercardioid, long shotgun microphone, designed for specific applications such as sport broadcast and location recording where wide-angle shots and loud noises’ rejection are vital to clean sound.The HC-35 produces a highly directional polar thanks to its longer interference tube than its siblings, the HC-15 and HC-22, providing better o-axis rejection.
It is also remarkably light compared to other solutions allowing an easier job for targeting sound sources when mounting it on windshields or classic softie slip-on protection.Â
Features and Highlights
Compatible accessories:Â
- 29cm Classic Softie
- Modular Windshield Kit WS 6
HC-35 Highlights
- Weight balanced to help keep center of gravity further back to provide improved handling
Capsule Design
- Professional broadcast quality and individually fine-tuned back electret capsule
- Consistent acoustic timbre with other Rycote microphones
- Smooth off-axis roll off
Preamp
- Compact design
- Ultralow noise circuitry
- Sophisticated RF shielding
- Low power consumption
Connector
- Gold-plated Neutrik XLR connections
RF-Protection and Materials
- Active in-line filtering
- Fine-tuned mechanical RF shielding
- Tested against RF interference
- Pre-amp housing made from non-corrosive machined brass
– low impedance to ensure best possible and longest lasting RF shielding
- Capsule/interference tube made from lightweight machined aluminium
- Non-reflective finish
SKU | RYC979010 |
---|---|
Power | Max voltage output: 4 Vp Capsule type: Back Electret Condenser |
Cable Type | Audio |
Signal-to-Noise Ratio | 87 dB typical (@ 1 kHz,Pa A-weighted) |
Impedance | Output Sensitivity 21.1 mV/Pa (-33.5 dBV) / Max Impedance: 100 Ω / Min. 1k Ω |
Frequency Response | 25Hz - 18 kHz Range / Output Sensitivity 21.1 mV/Pa (-33.5 dBV) |
Weight | 119g |
Dimensions | 352.4mm x 19mm |
Additional Info | Connector: XLR-3M
RF Shield: Yes Colour: Matte Black |
In The Box | Rycote HC-35 Long Shotgun Microphone (35cm) |